When choosing a monitor for industrial touch screen monitor use It is crucial to consider the setting it will be employed in and its use into consideration. Do you expect your monitor to come into contact with liquids? Does it require a good brightness? The kind of integration (rack-mount or panel mount etc.) is also crucial. Based on your work environment and the intended application you may select:
- The size of the screen you want and size. We determine dimensions like the dimensions as diagonal (in inches) and width: height ratio. The ratios of 6:9 and 4:3 are the most well-known however, it is possible to get a 5:4 or 16:10 screen.
- The resolution of the screen. The resolution refers to the level of clarity in the picture. It is measured in pixels.
- The brightness. This refers to the brightness that the display. When the display isn’t bright enough it will be difficult to see anything in daylight. The typical brightness is around 250 cd/m2. They must be brighter than 1,000 Cd/m2.
- There are a variety of standards that guide you in the selection of resistance to spattering from various substances (water and solvents, oils, and more. ) shocks, and more intense spattering in explosive environments (see the section on safety standards below). ).
- The connection and mounting of the screen.
What technology should you select to screen your commercial facility?
- LCD (Liquid Crystal Display) screens employ pixels that have backlighting that creates a typical image that lacks black density and gray shades. The backlighting process results in the LCD screen being very large and heavy. LCD screens are extremely energy-intensive however they have the benefit of being extremely cost-effective.
- The LED (Light Emitting Diode) screens are extremely popular in the marketplace. The images are extremely exact and uniform. This improves the quality of images and better contrast and also helps save approximately 30% of energy consumption compared to the LCD screen. LED screens are more costly than LCD screens, yet are still affordable.
- OLED (Organic Light-Emitting Diode) screens provide the highest image quality available. They have an unbeatable quality of field and color variations. The touch screen vending machine they use is lighter and thinner than other screen types and consumes less power. However, they are more expensive.
- Plasma screens: when compared to LCD screens the plasma screen offers superior image quality. the grey shades and black are more vivid and the depth is higher. The minimum size for an LCD screen is 107cm and is quite heavy. They also consume greater energy and power than LCD screens. Since the technology used is fairly old, this kind of screen is not expensive.
What connection should you select as your Industrial Monitor?
-
- VGA analog connector This is the most commonly used video output port. It is standard on industrial monitors. However, it is only an analog signal and does not work with extremely high resolutions.
- VGA-DVI connector: this version of VGA allows digital and analog signals to be gathered.
- HDMI and DisplayPort These are being increasingly employed in consumer devices. They carry the entire digital spectrum (audio as well as video) on one cable. They also allow transferring extremely high resolutions.
- LVDS connector: this kind of connector is recommended when integrated displays are used. It connects the screen to the graphics card using copper wires, and also allows for an extremely high speed of data.
- An S-video connector is used to connect the analog signal which transmits both brightness and colors at the same time.
- BNC connector transmits the audio signal digitally mode and also permits audio transmission.
